Play Builder – Use and Maintenance Guide
Recommended Use
Play Builder is designed to improve problem-solving skills whilst developing children’s balance and co-ordination. The interlocking design allows children to stack the blocks and slot together planks to create activity trails or role-play areas, the possibilities are endless.
Play Builder is intended for use on any level surface. However, when used on tarmac or any other abrasive surfaces the blocks may get scratched or become rough. We recommend using rubber mats or natural/artificial grass so your product lasts as long as possible.

Construction
Play Builder Blocks and Balance Planks are manufactured from Accoya. A durable timber that can be used outdoors all year round. The lids for the blocks are manufactured from Stokbord, a recycled plastic. Specialist outdoor screws are used to fix the blocks together.
These materials were chosen for their durability and strength although with hard use the product may become scuffed or chipped.
Warnings
• When building, ensure an adequate free space around the building and climbing area
• Supervision is recommended at all times
• Play Builder is not designed to withstand being thrown around and endure heavy impacts
• Children should not climb on structures with a height of 60cm or more
• Beware of unstable structures
Take caution when using blocks as some children may find some blocks heavy. Encourage teamwork and co-operation to move the blocks. For nursery age groups it is recommended that staff construct trails for little ones to play with.
Strength of Play Builder Planks
The Play Builder balance planks have been tested for their strength independently in accordance with EN1176 Part 1. Each plank withstood a test load of 300kg for over 5 minutes without failure.

Maintenance
Play Builder can be left outside all year round although Accoya timber will weather over time, it will begin to turn a silver grey colour. This does not change the structural integrity of the wood. Accoya has a 25 year guarantee against rot and infestation.
The timber is not resistant to surface mould or mildew, due to the nature of Accoya having no biocides, mould can occur when the conditions are right, just like any other timber. If mould does occur, we would suggest the following cleaning process which includes distilled white vinegar (concentration 5%-10%) and a non-scratch scrub.
Generously apply the vinegar to the Accoya, preferably when it is damp, and leave it to soak for 30 minutes or so, scrubbing with a brush at intervals. Then, while scrubbing, wash it off with hot water. Depending on the extent of the mould, this process might have to be repeated. For tougher mould, use a scotch brite pad – this product should only be used in extreme circumstances and should not be used as a regular cleaning resource.
Play Builder should be periodically inspected for splinters or broken and loose parts. Remove these parts from use as they may make play unsafe. If blocks or planks become roughened, apply sandpaper to smooth out the surface.
Storage of Equipment
We would advise to store this product outside or in a sheltered area with sufficient airflow. Storing your blocks under tarpaulin or in a shed with limited air flow may result in the build up of mould. If you do experience mould, please refer to the process above.
Cleaning Equipment
Any mud and dirt can be easily cleaned by scrubbing with warm water and mild detergent. Ensure blocks and planks are dry before using them again.
User Modification
Fun & Active Playgrounds cannot be responsible for any modifications made by customers without our supervision or testing.
